Basic Info.
Conductive Type
Bipolar Integrated Circuit
Technics
Semiconductor IC
Product Description
Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product, or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, Syrian.
SIM7600CE 4G HAT For Raspberry Pi, LTE Cat-4 4G / 3G / 2G Support, GNSS Positioning, For China
For different regions, we provide multiple LTE Cat-4/Cat-1 HATs to choose from:
| SIM7600A-H 4G HAT | LTE Cat-4 | mainly applicable in North America (US, CA) |
| SIM7600E-H 4G HAT | LTE Cat-4 | mainly applicable in Europe, Southeast Asia, West Asia, Africa, China, South Korea |
| SIM7600E LTE Cat-1 HAT | LTE Cat-1 |
| A7670E Cat-1 HAT |
| A7600E Cat-1/GSM/GPRS HAT |
| SIM7600SA-H 4G HAT | LTE Cat-4 | mainly applicable in Australia, New Zealand, Taiwan, Latin America |
| SIM7600CE 4G HAT | LTE Cat-4 | mainly applicable in China, and some Southeast Asia countries |
| SIM7600CE-CNSE 4G HAT |
| A7600C1 Cat-1/GSM/GPRS HAT | LTE Cat-1 |
| SIM7600G-H 4G HAT | LTE Cat-4 | the global version |
Please check the supported bands according to your local service provider, select the proper one when placing order.
4G HAT FOR RASPBERRY PI
Enabling LTE Cat-4 4G / 3G / 2G Communication & GNSS Positioning
Based on SIM7600CE-T
Features At A Glance
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc.
- Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS base station positioning
- Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
- Onboard CP2102 USB to UART converter, for serial debugging
- Breakout UART control pins, to connect with host boards like Arduino/STM32
- SIM card slot, supports 1.8V/3V SIM card
- TF card slot for storing data like files, messages, etc.
- Onboard audio jack and audio decoder for making telephone call
- 2x LED indicators, easy to monitor the operating status
- Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
- Baudrate: 300bps ~ 4Mbps (default: 115200bps)
- Autobauding baudrate: 9600bps ~ 115200bps
- Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
- Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
- Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications
| FREQUENCY BAND |
|---|
| LTE Cat-4 | LTE-FDD: B1/B3/B5/B8
LTE-TDD: B38/B39/B40/B41 |
| 3G | UMTS/HSDPA/HSPA+: B1/B8 |
| 2G | GSM/GPRS/EDGE: 900/1800 MHz |
| GNSS |
|---|
| Satellite systems | GPS/Beidou/GLONASS/GALILEO/QZSS |
| Receiver type | 16-channel |
| C/A Code |
| Sensitivity | -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BeiDou) |
| Cold starts: -148 dBm |
| Time-To-First-Fix (open air) | Cold starts: <35s |
| Hot starts: <1s |
| SMS AND AUDIO |
|---|
| SMS | Supported types: MT, MO, CB, Text, PDU |
| Storage: USIM card and ME (default) |
| Audio feature | Supports echo cancellation |
| Supports noise reduction |
| OTHER |
|---|
| Power supply | 5V |
| Operating voltage | 5V / 3.3V (configured via jumper) |
| Operating temperature | -30°C ~ 80°C |
| Storage temperature | -45°C ~ 90°C |
| Dimensions | 56.0 × 65.0mm |
Standard Raspberry Pi 40PIN GPIO
Compatible With Raspberry Pi Series Boards, Jetson Nano
Dial-Up On Windows/Linux
LTE Cat-4: Up To 50Mbps (Uplink) / Up To 150Mbps (Downlink) *
3G (HSPA+): Up To 5.76Mbps (Uplink) / Up To 42Mbps (Downlink) *
* stands for idealized data rate, the actual data rate depends on factors like network coverage, traffic congestion, base station condition, etc.
Cloud Communication
Supports Communication Protocols Including TCP/UDP/FTP/FTPS/HTTP/HTTPS
GNSS Positioning
Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS Base Station Positioning
Telephone Call & SMS Support
Making Telephone Call Or Sending SMS By AT Commands, With Onboard Audio Jack
What's On Board
- SIM7600CE-T
- CP2102 USB to UART converter
- NAU8810 audio decoder
- TXS0108EPWR voltage translator
translates 3.3V/5V into 1.8V - MP2128DT power chip
- SPX29302 power chip
- Raspberry Pi GPIO header
- SIM7600 control interface
for connecting with host boards like Arduino/STM32 - SIM card slot
supports 1.8V/3V SIM card - TF card slot
allows data storage like files, messages, etc. - 3.5mm earphone/mic jack
- USB interface
for testing AT Commands, getting GPS positioning data, etc. - USB to UART interface
for serial debugging, or login to Raspberry Pi
- MAIN antenna connector
- AUX antenna connector
- GNSS antenna connector
- Power switch
- Network status indicator
- Power indicator
- Operating voltage selection jumper
configured via 0Ω resistor jumper
VCCIO - 3.3V: set operating voltage as 3.3V
VCCIO - 5V: set operating voltage as 5V - UART selection jumper
A: access Raspberry Pi via USB to UART
B: control the SIM7600 by Raspberry Pi
C: control the SIM7600 via USB to UART - PWR configuration jumper
PWR - 3V3: auto startup on power-up (default)
PWR - D6: startup/shutdown by the Raspberry Pi D6 pin - Flight mode configuration jumper
NC by default, no flight mode control pin
Flight - D4: flight mode is controlled by the Raspberry Pi D4 pin - USB connector solder pads
- BOOT forced programming solder pads
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
Selection Guide
| | SIM7600CE-CNSE | SIM7600CE-T | SIM7600E-H | SIM7600A-H | SIM7600G-H |
|---|
| Applicable regions | China | Europe/Southeast Asia/West Asia/Africa/China/South Korea | North America | Global |
| Band |
| LTE Cat-4 | LTE-FDD
B1/B3/B5/B8
LTE-TDD
B38/B39/B40/B41 | LTE-FDD
B1/B3/B5/B7/B8/B20
LTE-TDD
B38/B40/B41 | LTE-FDD
B2/B4/B12 | LTE-FDD
B1/B2/B3/B4/B5/B7
/B8/B12/B13/B18/B19
/B20/B25/B26/B28/B66
LTE-TDD
B34/B38 /B39/B40/B41 |
| 3G | UMTS/HSDPA/HSPA+
B1/B8
TD-SCDMA
B34/B39 | UMTS/HSPA+
B1/B5/B8 | UMTS/HSPA+
B2/B5 | UMTS/HSDPA/HSPA+
B1/B2/B4/B5/B6/B8/B19 |
| 2G | GSM/GPRS/EDGE
900/1800 MHz | N/A | GSM/GPRS/EDGE
850/900/1800/1900MHz |
| GNSS | N/A | GPS/Beidou/GLONASS/GALILEO/QZSS |
| Data Rate |
| LTE Cat-4 | 150Mbps(DL)/50Mbps(UL) |
| 3G (HSPA+) | 42Mbps(DL)/5.76Mbps(UL) |
| 2G (EDGE) | 236.8Kbps(DL/UL) | N/A | 236.8Kbps(DL/UL) |
| 2G (GPRS) | 85.6Kbps(DL/UL) | N/A | 85.6Kbps(DL/UL) |
| Software Features |
| Network protocol | TCP/IP/IPV4/IPV6/Multi-PDP/FTP/FTPS/HTTP/HTTPS/DNS |
| Dial-up protocol | PPP/NDIS/RNDIS |
| USB driver | Windows XP/7/8/10, Linux (driver free for Raspbian) |
| Hardware Interfaces |
| SIM card slot | Compatible with 1.8V and 3V SIM card |
| UART | Supports AT commands through UART, compatible with 3.3V/5V operating voltage |
| USB port | Supports AT commands testing, network communication, firmware upgrading, etc. |
| USB to UART | Supports serial debugging, or login to Raspberry Pi |
| Audio jack | Supports audio actions like making telephoto call |
| TF card slot | Yes, for storing data like files, messages, etc. | N/A | Yes |
| Antenna connector | LTE main antenna | LTE main antenna + LTE diversity antenna + GNSS antenna |
| Applications |
| Examples | Healthcare, smart payment, Internet talk, environmental monitoring, energy monitoring, fleet management, smart industry, intelligent agriculture, etc. |
Address:
Bagualu No. 43, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics
Management System Certification:
ISO 9001
Company Introduction:
Shenzhen waveshare electronics Co., Ltd is a high-tech enterprise, professional research and development and production of Raspberry Pi expansion board, Jetson Nano expansion board and HD LCD / OLED display products, product line more than 10, with independent core technology, innovation ability and good industry reputation, has a hundred intellectual property rights, has more than ten years of industry precipitation.
